jak zjistit zapisy ?? (placena nabidka)

[pedrodc]

Daji se v něčem zjistit zapisy (multi hd ) Ice skylink,nejlepe v PC http:// ??? Pokud zadam http://ipazboxu otevře se azbox webcontrol. Ja chci cccam nebo oscam.Neplacene vyčtu pomoci cccam info 1.3 v azboxu.Když přidam port z [webif] ani tuk http://ipazboxu:8888

[hakizu]

IP boxu:port na ktorom ti bezi web rozhranie oscam alebo cccam. Hladaj entitlements. Tam najdes zapisy vsetky platene, neplatene, platne aj neplatne..

[pedrodc]

Zadam http://80.00.00.00:8888/ a nic. Cccam jede http://80.00.00.00:16001
Mam 20 dni promo,po 7 dnech vypadly placene.Zapisy mam pouze pro free programy,takze mam 2 problemy, neprochazej zapisy a nejde mi weboscam.Cccaminfo jsem rozjel dopsanim Ip adresy v programu cccam info 1.3.Dekuji za jakekoliv info

oscamconf.
[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/oscam.cw
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -10
serialreadertimeout = 1500
maxlogsize = 32
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900

[monitor]
port = 989
nocrypt = 127.0.0.1,0.0.0.0-192.168.1.255
aulow = 120
hideclient_to = 7
monlevel = 4
appendchaninfo = 1


[newcamd]
port = 15000@0D96:000004;15001@0D0F:000004,000008;15002@0D03:000004,000008
key = 0102030405060708091011121314
mgclient = 1

[cccam]
port = 8000
reshare = 1
version = 2.2.0

[dvbapi]
enabled = 1
au = 1
boxtype = azbox
user = root
pmt_mode = 0
priority = 0666,0D96,0D03,0D0F,0D70,0624,0D95

[webif]
httpport = 8888
httprefresh = 8
httpallowed =0.0.0.0-192.168.255.255,
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[pedrodc]

po teto změně jsem se připojil na Oscam http://xx.xx.xx.xxx:8888 aleluja a ted ty zapisy rozjet!!

[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/oscam.cw
emmlogdir = /var/log/oscam/emm
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -10
serialreadertimeout = 1500
maxlogsize = 32
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900

[monitor]
port = 989
nocrypt = 127.0.0.1,0.0.0.0-192.168.1.255
aulow = 120
hideclient_to = 7
monlevel = 4
appendchaninfo = 1


[newcamd]
port = 15000@0D96:000004;15001@0D0F:000004,000008;15002@0D03:000004,000008
key = 0102030405060708091011121314
mgclient = 1

[cccam]
port = 8000
reshare = 1
version = 2.2.0

[dvbapi]
enabled = 1
au = 1
boxtype = azbox
user = xxxx
pmt_mode = 0
priority = 0666,0D96,0D03,0D0F,0D70,0624,0D95

[webif]
httpport = 8888
httprefresh = 8
httpuser = xxxx
httppwd = xxxx
httpallowed =0.0.0.0-192.168.255.255,xxx.xxx.xxx.xxx
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[hakizu]

MGcamd a oscam nastavit tak aby ti prechadzali zapisy, t.j. v oscame povolit clientovi zapisy a v mgcamd mg_cfg AU 01, nastavit link v cccamd.list alebo newcamd.list na oscam server.
Zapisy cez oscam - cccam neprechadzaju, resp. nie tie co potrebujes.

obsah mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 }

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

Ja osobne to mam takto a ked potrebujem povolit zapisy spustim si mgcamd. Kartu mam v dm500 v oscame, slape to super.

pojde ti aj obraz. pouzi mgcamd 1.35 a novsi.

Je to tu rozoberane treba hladat. Alebo si tam hod cccam 2.3.0 povol zapisy v nom ak nie su a prejdu ti aj tam.