Samba a dva ET se stejným image v síti

[Hdtv09]

Prosím o radu. Mám ET 9100 a ET 9200 na obou přijímačím mám stejný image oba fungují dobře. Problém mám ale se sambou v síti kde je vidět jenom jeden. Dá se s tím něco udělat? Díky za odpověď.

[dym1]

Nemam doma dva xtrendy a nepises aky image skusil by som to takto.

Najskor si odzalohuj "smb.conf" z kazdeho prijimaca

Cez RCC alebo DCC zvol ftp a vojdi do /etc/samba/ a pravym klikni na "smb.conf" a zvol upravit mal by si tam vidiet nieco taketo:

[global]
load printers = no
guest account = root
log file = /tmp/smb.log
log level = 1
security = share
server string = OpenPLi %h network services #tu si daj napr.9100 a v druhom prijimaci 9200
workgroup = OpenPLi #tu je nazov siete ak uz mas doma nejaku vytvorenu tak ju pomenuj rovnako ak nie nechaj tak
netbios name = %h
case sensitive=yes
preserve case=yes
short preserve case=yes
socket options = TCP_NODELAY
preferred master = no
oplocks = no

Takze po uprave by malo byt asi takto pre: 9100

[global]
load printers = no
guest account = root
log file = /tmp/smb.log
log level = 1
security = share
server string = 9100
workgroup = OpenPLi
netbios name = %h
case sensitive=yes
preserve case=yes
short preserve case=yes
socket options = TCP_NODELAY
preferred master = no
oplocks = no

Restart celeho boxu.

[Hdtv09]

Image používám na obou stejný "Xtrend Alliance Image based on Linux 3.8.7. for ET9x00_by_vikino_10.05.2013". Tak jsem to zkoušel změnit,l sice v TC ale taky to jde.
Nastaveno mám takto:
[global]
load printers = no
guest account = root
log file = /tmp/smb.log
log level = 1
security = share
server string = 9100
workgroup = WORKGROUP
netbios name = %h
case sensitive=yes
preserve case=yes
short preserve case=yes
socket options = TCP_NODELAY
preferred master = no ;(These stop the machine being master browser, which means that it doesn't waste time there.)
oplocks = no
[global]
load printers = no
guest account = root
log file = /tmp/smb.log
log level = 1
security = share
server string = 9200
workgroup = WORKGROUP
netbios name = %h
case sensitive=yes
preserve case=yes
short preserve case=yes
socket options = TCP_NODELAY
preferred master = no ;(These stop the machine being master browser, which means that it doesn't waste time there.)
oplocks = no

Zkoušel jsem ve workgroup nechat původní OpenPLI, ale stejně to nejde. Stále v PC v síti vidím jen jeden et9X00.

[dym1]

Skus este zmenit tento riadok

netbios name = %h

netbios name = 9100

a druhy box

netbios name = 9200

[Hdtv09]

Super. Funguje to. Díky moc za radu