Stránka 1 z 3

Drivers and bootloader

Napsal: 15 úno 2011, 12:58
od vikino
fw (drivers) z 20110214

-improve live streaming playback (and vtuner)
-VOB AC3 fix
-VOB lpcm fix
-rc long standby keypress detection fix (needs frontpanel ver: "a" update)
-hdmi CEC support (write/read commands to/from /dev/hdmi_cec, cec message format <address><length><data1>...<dataN>)
-avoid claming cdc devices
-improve video mode change detection speed

Nove driver-i je najlepsie instalovat spolu s novym img PLI od 15.2.2011 odtialto: NIGHTLY OPENPLI BUILDS

Po preflashovani noveho img PLI s novymi ovladacmi je mozne este upgradovat novy bootloader, kde je odstranena aj chyba pri flashovani vacsich img.
Usb disk naformatovat v PC na FAT32, podobne ako pred flashovanim noveho img. Nakopirujte rozbaleny novy bootloader po adresar "ET9000" na usb flashku a postupujte rovnako ako pri upgrade img. Prijimac sa po preflashovani sam restartne.

Re: Drivers and bootloader

Napsal: 14 bře 2011, 06:42
od vikino
Drivers Update 2011-03-14

Changelog:

-support sending CEC commands when the tv is in standby
-disable lnb power in standby
-fixed lnb loopthrough in standby
-support increased lnb voltage
-fixed pip freeze when switching pip/main screen
-fixed switching from 24p to 25p mode
-support linuxtv dvr device (/dev/misc/pvr is still available for backward compatibility)
-fixed mp3 endoffile detection
-hd iframe 'pip'

Rozbalit a prekopirovat-prepisat v /lib/modules/2.6.18-7.4/extra... , alebo pockat na update v Open PLI ...

Re: Drivers and bootloader

Napsal: 20 bře 2011, 07:05
od vikino
Drivers 19032011
20110319

-tune failed fixes

Rozbalit a prekopirovat-prepisat v /lib/modules/2.6.18-7.4/extra... restart boxu

Re: Drivers and bootloader

Napsal: 22 bře 2011, 04:58
od vikino
Drivers Update 2011-03-22

-fix simultaneous recordings

Rozbalit a prekopirovat-prepisat v /lib/modules/2.6.18-7.4/extra... restart boxu

Re: Drivers and bootloader

Napsal: 09 dub 2011, 06:16
od vikino
Drivers 2011-04-09

changelog:
-smartcard interface improvements
-media playback improvements
-AC3+/DDP support (use AUDIO_SET_BYPASS_MODE 0x22)
-vtuner: DVB-S2 support
-increased default alsa volume (pcm playback)

Rozbalit a prekopirovat-prepisat v /lib/modules/2.6.18-7.4/extra... restart boxu

Diskusia tu: viewtopic.php?f=287&t=7480

Re: Drivers and bootloader

Napsal: 23 dub 2011, 06:50
od vikino
Drivers 2011-04-23

-Xvid
-Improved media playback
-Radio playback fix
-pip fix
-Video enhancement settings

Rozbalit a prekopirovat-prepisat v /lib/modules/2.6.18-7.4/extra... restart boxu

Diskusia: viewtopic.php?f=287&t=7480

Re: Drivers and bootloader

Napsal: 16 kvě 2011, 20:12
od vikino
New Drivers 2011-05-16

Changelog
- Media playback improved
- Xvid Fix
- Rotor fine tune Fix
- Blindscan Support



Note:
These Drivers will not work with CT-Image v1.1!
Please wait until CT-Image v1.2 is released.


img Open PLi z 18.5.2011 uz obsahuje nove driveri

Re: Drivers and bootloader

Napsal: 06 čer 2011, 11:47
od vikino
Driveri z 16.5.2011 sa nedaju pouzit do starsich imgs, vydanych do tohoto datumu. K dnesnemu dnu aktualizovali svoje imgs teamy Sifteam, Open PLi, HDFreaks, Power of Dream HD+, VIX team, Egami team, ktore uz posledne ovladace obsahuju. Vsetky nove imgs najdete na tomto fore... http://www.forum.satdigitalne.cz/viewforum.php?f=288
Caka sa na aktualizaciu img od Official support teamu (v.1.2)

Re: Drivers and bootloader

Napsal: 07 čer 2011, 21:33
od vikino
New Bootloader 19.05.11

- umoznuje instalovat images o velkosti az do 100MB, predosla ver. z februara 2011 umoznovala instalaciu imgs do velkosti 60MB
- rozbalte a nakopirujte et9000 na usb flash disc a postupujte rovnako ako pri flashovani noveho image.
- po restarte zostanu Vase nastavenia zachovane

Re: Drivers and bootloader

Napsal: 28 čer 2011, 07:50
od vikino
Drivers Update 2011-06-27

Changelog:

-increase framebuffer acceleration memory size
-always downmix audio on analog outputs
-support /proc/stb/fp/was_timer_wakeup (needs frontpanel update)
-vcr scart detection fix
-vfd improvements
-vfd: support greek and cyrillic charsets
-vfd: support additional symbols (see /proc/stb/lcd/*)
-pcm playback improvements
-sci improvements

Nakopirovat-prepisat v: /lib/modules/2.6.18-7.4/extra/ potom restart boxu.

Nedaju sa pouzit v Clarke-Support Image v1.1, pockat na v1.2.

Diskusia tu: viewtopic.php?f=287&t=7480

Re: Drivers and bootloader

Napsal: 25 črc 2011, 08:58
od vikino
Bootloader update 19-07-2011

With UBIFS support

(UBIFS - zaklad pre nove images, ktore sa objavia v buducnosti.)

Re: Drivers and bootloader

Napsal: 25 črc 2011, 09:48
od vikino
Mozna zmena uvodneho loga BL. Pred nainstalovanim BL, si zamente subor splash.bin v adresari bootloadera et9000.

Re: Drivers and bootloader

Napsal: 12 srp 2011, 07:30
od vikino
linux drivers 2.6.31 for ET 9000 / 11.08.2011

- vfd: cyrillic/greek charactermap improvements
- scart: fix slowblanking
- alsa: fix playback of high bitrate pcm data
- fix mute status of ac3 in passthrough mode
- add 'use_advanced_remote
- add hdmi-cec ioctl

copy and replace the 4 extracted Files here: /lib/modules/2.6.31-3.2/extra
reboot.

Nove ovladace pouzit len v images, ktore obsahuju kernel 2.6.31!!!

Re: Drivers and bootloader

Napsal: 20 zář 2011, 06:14
od vikino
New Drivers 2011-09-18

-hdmi cec: signal address change with POLLPRI
-scaler sharpness: fixed 'neutral' value (middle of the scale)
-added video source viewport/clipping settings (/proc/stb/vmpeg/[0-1]/clip_*)


copy and replace the 4 extracted Files here: /lib/modules/2.6.31-3.2/extra
reboot.

Re: Drivers and bootloader

Napsal: 27 zář 2011, 00:26
od vikino
New Drivers 26-09-2011

New Drivers 26-09-2011
-sci improvements (ORF-ICE)
-fix pip with webbrowser combination


copy and replace the 4 extracted Files here: /lib/modules/2.6.31-3.2/extra
reboot.

Clarke-Tech Support Team

Changelog drivers:

Kód: Vybrat vše

 - MKV trickplay fix
 - No channel lock fix (When no signal is available on the channel then the box reacts slow)
 - Increase speed channel switching
 - STC sync for video/audio/firstenable (DTS Downmix solution, need seperate dts code which will be released soon)
 - SCI improvements (Final fix for orf-ice and some other adjustments)
 - VFD: TS icoon by TimeShift (by activate timeshift the TS icoon on the VFD display light up)
 - Scaler-Sharpness (0 - neutral) in the middle (13)

 Bootloader test:
 - change directory path to et5x00, et6x00, et9x00 (This will change even the address for the feed!!)