Satdigitalne.cz

alebo myslis restore z backupu? zatial automatizovany nie je, musim dorobit, len nemam cas teraz.

manualne:

restore sa vykona tak, treba ist do adresara kde je vytovreny backup, tam su podla datumu vytvorene tar archivy.

archiv sa prezera:
tar tvf meno_archivu.tar

archiv sa otvori:
tar xvf meno_archivu.tar
cd meno_archivu

a skopirovat subory / adresare tam kam patria

monkus píše:alebo myslis restore z backupu? zatial automatizovany nie je, musim dorobit, len nemam cas teraz.

manualne:

restore sa vykona tak, treba ist do adresara kde je vytovreny backup, tam su podla datumu vytvorene tar archivy.

archiv sa prezera:
tar tvf meno_archivu.tar

archiv sa otvori:
tar xvf meno_archivu.tar
cd meno_archivu

a skopirovat subory / adresare tam kam patria

No to sem potřeboval.
Díky moc

monkus píše:je to zvyraznene:

# NEED TO CHANGE !!! (if you`re using usb device)
BACKUPDIR=/DATA/hdb1/backup
# NEED TO CHANGE !!! (if you`re using usb device)

Monkus, já jsem asi natvrdlý ... ve kterém souboru se dá tato cesta upravit. Zkoušel jsem to zadat upravené, jako příkazový řádek telnetu, ale po spuštění backupu jsem v adresáři backup na USB nic nenašel :sad: Tak asi někde dělám chybu. Díky

panborat píše:

monkus píše:je to zvyraznene:

# NEED TO CHANGE !!! (if you`re using usb device)
BACKUPDIR=/DATA/hdb1/backup
# NEED TO CHANGE !!! (if you`re using usb device)

Monkus, já jsem asi natvrdlý ... ve kterém souboru se dá tato cesta upravit. Zkoušel jsem to zadat upravené, jako příkazový řádek telnetu, ale po spuštění backupu jsem v adresáři backup na USB nic nenašel :sad: Tak asi někde dělám chybu. Díky

EMU/OpenXCAD/backup/backup.sh

Jo, tento ... já myslel, že to je zdrojový exáč ... omlouvám se za zmatky a moc díky

peknes pluginek dik.. :)

monkus píše:je to zvyraznene:

# NEED TO CHANGE !!! (if you`re using usb device)
BACKUPDIR=/DATA/hdb1/backup
# NEED TO CHANGE !!! (if you`re using usb device)

Mozna bys mohl do dalsi verze tu USB alternativu rovnou napsat a zakomentovat:

# NEED TO CHANGE !!! (if you`re using usb device)
BACKUPDIR=/DATA/hdb1/backup
# NEED TO CHANGE !!!
#BACKUPDIR=/DATA/usb1/sda1/backup

Parada, jeste budu muset vyzkouset zpetny presun zalohy do nejakeho noveho fw.

MMP[backup]$ /EMU/OpenXCAS/backup/backup.sh
AzBox HD Backup v0.94 for OpenXCAS (c) by monkus

Backup List:
tar: Removing leading '/' from member names
PLUGINS/
PLUGINS/lost+found/
PLUGINS/home/
PLUGINS/home/stbuser/
PLUGINS/plugins.conf
PLUGINS/OpenXCAS/
PLUGINS/OpenXCAS/sh/
PLUGINS/OpenXCAS/sh/delete.sh
PLUGINS/OpenXCAS/sh/start.sh
PLUGINS/OpenXCAS/sh/stop.sh
PLUGINS/OpenXCAS/sh/install.sh
PLUGINS/OpenXCAS/addons.conf
PLUGINS/OpenXCAS/MultiCAS/
PLUGINS/OpenXCAS/MultiCAS/tps.bin
PLUGINS/OpenXCAS/MultiCAS/openxcas.conf
PLUGINS/OpenXCAS/MultiCAS/Key.bin
PLUGINS/OpenXCAS/MultiCAS/emu_module
PLUGINS/OpenXCAS/MultiCAS/card_key.bin
PLUGINS/OpenXCAS/MultiCAS/splitterdata.txt
PLUGINS/OpenXCAS/MultiCAS/priocaid.cfg
PLUGINS/OpenXCAS/MultiCAS/cccam.cfg
PLUGINS/OpenXCAS/MultiCAS/cardkeydata.txt
PLUGINS/OpenXCAS/MultiCAS/example-priocaid.cfg
PLUGINS/OpenXCAS/MultiCAS/example-cccam.cfg
PLUGINS/OpenXCAS/MultiCAS/example-splitterdata.txt
PLUGINS/OpenXCAS/MultiCAS/example-cardkeydata.txt
PLUGINS/OpenXCAS/MultiCAS/Data9F.bin
PLUGINS/OpenXCAS/module.seq
PLUGINS/OpenXCAS/backup/
PLUGINS/OpenXCAS/backup/backup.list
PLUGINS/OpenXCAS/backup/restore.sh
PLUGINS/OpenXCAS/backup/backup.sh
PLUGINS/OpenXCAS/backup/custom.list
PLUGINS/OpenXCAS/backup/openxcas.conf
PLUGINS/OpenXCAS/swapon/
PLUGINS/OpenXCAS/swapon/swapon.sh
PLUGINS/OpenXCAS/swapon/openxcas.conf
PLUGINS/OpenXCAS/usbcopy/
PLUGINS/OpenXCAS/usbcopy/usbcopy.sh
PLUGINS/OpenXCAS/usbcopy/openxcas.conf
PLUGINS/OpenXCAS/usbmount/
PLUGINS/OpenXCAS/usbmount/usbmount.sh
PLUGINS/OpenXCAS/usbmount/openxcas.conf
PLUGINS/MultiCASinfo/
PLUGINS/MultiCASinfo/sh/
PLUGINS/MultiCASinfo/sh/install.sh
PLUGINS/MultiCASinfo/sh/delete.sh
PLUGINS/MultiCASinfo/sh/stop.sh
PLUGINS/MultiCASinfo/sh/start.sh
PLUGINS/MultiCASinfo/MultiCASinfo.sh
PLUGINS/MultiCASinfo/Font1.ttf
PLUGINS/MultiCASinfo/MultiCASinfo
PLUGINS/MultiCASinfo/exit.scr
MMP/hd/Program/Image/Startup-Simple/boot_logo.png
MMP/etc/ssh/
MMP/etc/ssh/ssh_host_key.pub
MMP/etc/ssh/ssh_host_key
MMP/etc/ssh/sshd_config
MMP/etc/ssh/ssh_host_dsa_key.pub
MMP/etc/ssh/ssh_host_rsa_key.pub
MMP/etc/ssh/ssh_host_rsa_key
MMP/etc/ssh/ssh_host_dsa_key
MMP/etc/samba/
MMP/etc/samba/secrets.tdb
MMP/etc/samba/smbpasswd
MMP/etc/samba/smbusers
MMP/etc/samba/smb.conf
MMP/etc/samba/lmhosts
DISK2/interfaces
DISK2/resolv.conf
DISK2/hostname
DISK2/selene.conf
DISK2/browser_conf.dat
DISK2/antenna_list.dat
DISK2/all_channel.dat
DISK2/DVBS.dat
etc/shadow
etc/passwd

Latest Backup Archive: /DATA/usb1/sda1/backup/20091027175446.tar
MMP[backup]$

Jak se dela restore s tym scriptem restore.sh?
Ja jsem zalohu otevrel a potom kopiroval,ale s tym scriptem to bude asi lepsi.
Diky moc za rady

napr:

sh restore.sh

ak chces nejaky iny image ako latest.tar, treba zadat:

sh restore.sh 2009xxxxxx.tar

spravi to vsetko, restorne nastavenia, setting, reboot ....

monkus píše:napr:

sh restore.sh

ak chces nejaky iny image ako latest.tar, treba zadat:

sh restore.sh 2009xxxxxx.tar

spravi to vsetko, restorne nastavenia, setting, reboot ....

Diky moc konecne to nemusim kopirovat rucne.